Continuous Flow Electrochemical Synthesis of Olivine-Structured NaFePO4 Cathode Material for Sodium-Ion Batteries from Recycle LiFePO4.

To mitigate the environmental impact of the improper disposal of spent LiFePO4 batteries and reduce resource waste, the development of LiFePO4 recycling technologies is of paramount importance. Meanwhile, olivine-structured NaFePO4 in sodium-ion batteries has received great attention, due to its high theoretical specific capacity of 154 mAh g-1 and excellent stability. However, olivine NaFePO4 only can be synthesized from olivine LiFePO4. Accordingly, in this proposal, developing the continuous flow electrochemical solid-liquid reactor-based metal ion insertion technology is to utilize the olivine FePO4, recycled from LiFePO4, and to synthesize NaFePO4. Additionally, by employing I- as the reducing agent, NaFePO4 is successfully synthesized with a discharge-specific capacity of 134 mAh g-1 at 0.1C and a remarkable capacity retention rate of 86.5% after 100 cycles at 0.2C. And the reasons for sodium deficiency in the synthesized NFP are elucidated through first-principles calculations. Furthermore, the kinetics of the solid-solution reaction 2 (Na2/3+ßPO4→ Na1-αFePO4) mechanism improve with cycling and are sensitive to temperature. Utilizing a minimal amount of reducing agent in the electrochemical reactor, NaFePO4 synthesis is successfully achieved. This innovative approach offers a new, cost-effective, and environmentally friendly strategy for preparing NaFePO4 from recycling LiFePO4.

LiF/Li3N-Rich Electrode-Electrolyte Interfaces Enabled by Multi-Functional Electrolyte Additive to Achieve High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

LiPF6-based carbonate electrolytes have been extensively employed in commercial Li-ion batteries, but they face numerous interfacial stability challenges while applicating in high-energy-density lithium-metal batteries (LMBs). Herein, this work proposes N-succinimidyl trifluoroacetate (NST) as a multifunctional electrolyte additive to address these challenges. NST additive could optimize Li+ solvation structure and eliminate HF/H2O in the electrolyte, and preferentially be decomposed on the Ni-rich cathode (LiNi0.8Co0.1Mn0.1O2, NCM811) to generate LiF/Li3N-rich cathode-electrolyte interphase (CEI) with high conductivity. The synergistic effect reduces the electrolyte decomposition and inhibits the transition metal (TM) dissolution. Meanwhile, NST promotes the creation of solid electrolyte interphase (SEI) rich in inorganics on the Li metal anode (LMA), which restrains the growth of Li dendrites, minimizes parasitic reactions, and fosters rapid Li+ transport. As a result, compared with the reference, the Li/LiNi0.8Co0.1Mn0.1O2 cell with 1.0 wt.% NST exhibits higher capacity retention after 200 cycles at 1C (86.4% vs. 64.8%) and better rate performance, even at 9C. In the presence of NST, the Li/Li symmetrical cell shows a super-stable cyclic performance beyond 500 h at 0.5 mA cm-2/0.5 mAh cm-2. These unique features of NST are a promising solution for addressing the interfacial deterioration issue of high-capacity Ni-rich cathodes paired with LMA.

Plasticity changes in iron homeostasis in hibernating Daurian ground squirrels (Spermophilus dauricus) may counteract chronically inactive skeletal muscle atrophy.

Disuse-induced muscular atrophy is frequently accompanied by iron overload. Hibernating animals are a natural animal model for resistance to disuse muscle atrophy. In this paper, we explored changes in skeletal muscle iron content of Daurian ground squirrels (Spermophilus dauricus) during different periods of hibernation as well as the regulatory mechanisms involved. The results revealed that compared with the summer active group (SA), iron content in the soleus muscle (SOL) decreased (- 65%) in the torpor group (TOR), but returned to normal levels in the inter-bout arousal (IBA); splenic iron content increased in the TOR group (vs. SA, + 67%), decreased in the IBA group (vs. TOR, - 37%). Expression of serum hepcidin decreased in the TOR group (vs. SA, - 22%) and returned to normal levels in the IBA groups; serum ferritin increased in the TOR group (vs. SA, + 31%), then recovered in the IBA groups. Soleus muscle transferrin receptor 1 (TfR1) expression increased in the TOR group (vs. SA, + 83%), decreased in the IBA group (vs. TOR, - 30%); ferroportin 1 increased in the IBA group (vs. SA, + 55%); ferritin increased in the IBA group (vs. SA, + 42%). No significant differences in extensor digitorum longus in iron content or iron metabolism-related protein expression were observed among the groups. Significantly, all increased or decreased indicators in this study returned to normal levels after the post-hibernation group, showing remarkable plasticity. In summary, avoiding iron overload may be a potential mechanism for hibernating Daurian ground squirrels to avoid disuse induced muscular atrophy. In addition, the different skeletal muscle types exhibited unique strategies for regulating iron homeostasis.

Roles of Myokines and Muscle-Derived Extracellular Vesicles in Musculoskeletal Deterioration under Disuse Conditions.

Prolonged inactivity and disuse conditions, such as those experienced during spaceflight and prolonged bedrest, are frequently accompanied by detrimental effects on the motor system, including skeletal muscle atrophy and bone loss, which greatly increase the risk of osteoporosis and fractures. Moreover, the decrease in glucose and lipid utilization in skeletal muscles, a consequence of muscle atrophy, also contributes to the development of metabolic syndrome. Clarifying the mechanisms involved in disuse-induced musculoskeletal deterioration is important, providing therapeutic targets and a scientific foundation for the treatment of musculoskeletal disorders under disuse conditions. Skeletal muscle, as a powerful endocrine organ, participates in the regulation of physiological and biochemical functions of local or distal tissues and organs, including itself, in endocrine, autocrine, or paracrine manners. As a motor organ adjacent to muscle, bone tissue exhibits a relative lag in degenerative changes compared to skeletal muscle under disuse conditions. Based on this phenomenon, roles and mechanisms involved in the communication between skeletal muscle and bone, especially from muscle to bone, under disuse conditions have attracted widespread attention. In this review, we summarize the roles and regulatory mechanisms of muscle-derived myokines and extracellular vesicles (EVs) in the occurrence of muscle atrophy and bone loss under disuse conditions, as well as discuss future perspectives based on existing research.

Polydopamine-Induced Metal-Organic Framework Network-Enhanced High-Performance Composite Solid-State Electrolytes for Dendrite-Free Lithium Metal Batteries.

Due to the high safety, flexibility, and excellent compatibility with lithium metals, composite solid-state electrolytes (CSEs) are the best candidates for next-generation lithium metal batteries, and the construction of fast and uniform Li+ transport is a critical part of the development of CSEs. In this paper, a stable three-dimensional metal-organic framework (MOF) network was obtained using polydopamine as a medium, and a high-performance CSE reinforced by the three-dimensional MOF network was constructed, which not only provides a continuous channel for Li+ transport but also restricts large anions and releases more mobile Li+ through a Lewis acid-base interaction. This strategy endows our CSEs with an ionic conductivity (7.1 × 10-4 S cm-1 at 60 °C), a wide electrochemical window (5.0 V), and a higher Li+ transfer number (0.54). At the same time, the lithium symmetric batteries can be stably cycled for 2000 h at 0.1 mA cm-2, exhibiting excellent electrochemical stability. The LiFePO4/Li cells have a high initial discharge specific capacity of 153.9 mAh g-1 at 1C, with a capacity retention of 80% after 915 cycles. This paper proposes an approach for constructing three-dimensional MOF network-enhanced CSEs, which provides insights into the design and development of MOFs for the positive effects of high-performance CSEs.

Weakened Contractile Performance and Mitochondrial Respiratory Complex Activity in Skeletal Muscle Improve during Interbout Arousal in Hibernating Daurian Ground Squirrel, Spermophilus dauricus.

Mammalian hibernation is composed of multiple episodes of torpor bout, separated by phases of interbout arousal. During torpor, the skeletal muscles of mammals are undoubtedly inactive, but it has been proven to mitigate disuse atrophy. While interbout arousal has been implicated in the prevention of muscle atrophy, the underlying mechanisms sustaining muscle contraction remain to be explored. In the present study, Daurian ground squirrels (Spermophilus dauricus) were divided into four groups: pre-hibernation (PRE), torpor (TOR), interbout arousal (IBA), and post-hibernation (POST). The contractile performance of slow-twitch soleus muscle (SOL) and fast-twitch extensor digitorum longus muscle (EDL) was detected both in situ and in vitro. Concurrently, mitochondrial respiratory chain complex activity in these muscles was quantified. Our findings revealed that in situ contractile properties of both muscles, including force, power output, time duration, and force development/relaxation rates of twitch contraction, and force and power output of tetanic contraction declined in the TOR group compared to the PRE group, but improved in the IBA and POST groups. Fatigue resistance of muscles, determined by the power output of repetitive tetanic contractions in situ, decreased in the TOR group but recovered in the IBA and POST groups. In vitro studies demonstrated that tetanic contraction power output in isolated muscles increased with muscle temperature in both TOR and IBA groups. However, at the same temperature, power output was consistently lower in the TOR group compared to the IBA group. Moreover, the activity of the mitochondrial respiratory chain complex, especially Complexes I and II, decreased in the TOR group but showed recovery in the IBA and POST groups. These findings suggest that both the contractile performance and fatigue resistance of mammalian skeletal muscle are compromised during torpor but can be improved during interbout arousal and post-hibernation. The rebound in body temperature and rise in mitochondrial respiratory chain complex activity in skeletal muscle are involved in enhancing contractile performance and fatigue resistance. This study suggests that interbout arousal functions as a vital temporal interval during which skeletal muscles can transition from the inactivity induced by torpor to a state of restored contractile functionality. Thus, interbout arousal serves as a behavioral safeguard against disuse-induced damage to skeletal muscles during hibernation.

LiF-Rich Electrode-Electrolyte Interfaces Enabled by Bifunctional Electrolyte Additive to Achieve High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Commercial Li-ion batteries use LiPF6-based carbonate electrolytes extensively, but there are many challenges associated with them, like dendritic Li growth and electrolyte decomposition, while supporting the aggressive chemical and electrochemical reactivity of lithium metal batteries (LMBs). This work proposes 1,1,1,3,3,3-hexafluoroisopropyl methacrylate (HFM) as a multifunctional electrolyte additive, constructing protective solid-/cathode-electrolyte interphases (SEI/CEI) on the surfaces for both lithium metal anode (LMA) and Ni-rich cathode to solve these challenges simultaneously. The highly fluorinated group (-CF3) of the HFM molecule contributes to the construction of SEI/CEI films rich in LiF that offer excellent electronic insulation, high mechanical strength, and surface energy. Accordingly, the HFM-derived LiF-rich interphases can minimize the electrolyte-electrode parasitic reactions and promote uniform Li deposition. Also, the problems of LiNi0.8Co0.1Mn0.1O2 particles' inner microcrack evolution and the growth of dendritic Li are adequately addressed. Consequently, the HFM additive enables a Li/LiNi0.8Co0.1Mn0.1O2 cell with higher capacity retention after 200 cycles at 1 C than the cell with no additive (74.7 vs 52.8%), as well as a better rate performance, especially at 9 C. Furthermore, at 0.5/0.5 mAh cm-2, the Li/Li symmetrical battery displays supersteadfast cyclic performance beyond 500 h when HFM is present. For high-performance LMBs, the HFM additive offers a straightforward, cost-effective route.

Plasticity changes in neuromuscular junction morphology and related regulatory proteins in the hibernating ground squirrel.

Skeletal muscle disuse atrophy can cause degenerative changes in neuromuscular junction morphology. Although Daurian ground squirrels (Spermophilus dauricus) are a natural anti-disuse animal model for studying muscle atrophy during hibernation, little is known about the morphological and regulatory mechanisms of their neuromuscular junctions. Here, we found that morphological indices of the soleus muscle were significantly lower during hibernation (torpor and interbout arousal) compared with pre-hibernation but recovered during post-hibernation. In the extensor digitorum longus muscle, neuromuscular junction morphology did not change significantly during hibernation. Agrin-Lrp4-MuSK is a key pathway for the formation and maintenance of the neuromuscular junction. Our results showed that low-density lipoprotein receptor-associated protein 4 (Lrp4) expression in the soleus (slow muscle) decreased by 46.2% in the interbout arousal group compared with the pre-hibernation group (P = 0.019), with recovery in the post-hibernation group. Compared with the pre-hibernation group, agrin expression in the extensor digitorum longus (fast muscle) increased by 67.0% in the interbout arousal group (P = 0.016). In conclusion, periodic up-regulation in agrin expression during interbout arousal may be involved in the maintenance of neuromuscular junction morphology in the extensor digitorum longus muscle during hibernation. The degenerative changes in neuromuscular junction morphology and the periodic decrease in Lrp4 protein expression in the soleus during hibernation, these changes recovered to the pre-hibernation levels in the post-hibernation group, exhibiting significant plasticity. This plasticity may be one of the important mechanisms for resisting disuse atrophy in hibernating animals.NEW & NOTEWORTHY This study is the first to explore the neuromuscular junction morphology of slow- and fast-twitch muscles in Daurian ground squirrels during different periods of hibernation. Results showed that the neuromuscular junction maintained stable morphology in the extensor digitorum longus muscle. The degenerative changes in neuromuscular junction morphology and the periodic decrease in Lrp4 protein expression in the soleus muscle during hibernation recovered in post-hibernation, exhibiting significant plasticity.

Poly-1,3-dioxolane anchoring graphitic carbon nitride to achieve high-energy-density solid-state Li metal batteries.

Solid-state Li metal batteries (SSLMBs) are promising solutions for the next-generation energy storage devices with high energy densities and safety. Accordingly, the advanced solid-state electrolytes are further needed to address the challenges-low ionic conductivity, poor interfacial compatibility and uncontrollably Li dendrites, boosting the electrochemical and safety performances of SSLMBs. Herein, a "flexible and rigid" strategy is proposed to enhance the electrochemical and mechanical properties of polyethylene oxide (PEO)-based electrolytes. Specifically, the flexible poly-1,3-dioxolane (poly-DOL) and rigid graphitic carbon nitride (g-C3N4) are coordinated by a coupling reaction to prepare g-C3N4-poly-DOL, which is further employed as the filler for the PEO matrix to fabricate a composite polymer electrolyte g-C3N4-pDOL-PEO. The flexible poly-DOL and rigid g-C3N4 together endow the PEO-based electrolyte with good interfacial stability, high ion-conductivity and strong mechanical strength. Consequently, the Li/g-C3N4-pDOL-PEO/LiFePO4 cell delivers high cyclability with a capacity retention ratio of 89.7 % after 150 cycles and an average Coulombic efficiency over 99.9 %, and, the Li/g-C3N4-pDOL-PEO/Li cell can stably cycle beyond 300 h at 0.2 mAh cm-2 with small polarization (13 mV). The "flexible and rigid" strategy coupling the polymer with the filler provides an effective electrolyte design for high-performance SSLMBs.

Atomic Engineering Modulates Oxygen Reduction of Hollow Carbon Matrix Confined Single Metal-Nitrogen Sites for Zinc-Air Batteries.

The systematical understanding of metal-dependent activity in electrocatalyzing oxygen reduction reaction (ORR), a vital reaction with sluggish kinetics for zinc-air batteries, remains quite unclear. An atomic and spatial engineering modulating ORR activity over hollow carbon quasi-sphere (HCS) confined in a series of single M-N (M = Cu, Mn, Ni) sites is reported here. Based on the theoretical prediction and experimental validation, Cu-N4 site with the lowest overpotential shows a better ORR kinetics than Mn-N4 and Ni-N4 . The ORR activity of single-atom Cu center can be further improved by decreasing the coordination number of N to two, namely Cu-N2 , due to the enhancement of electrons with lower coordination structure. Benefitting from the unique spatial confinement effect of the HCS structure in modulating electronic feature of active sites, the Cu-N2 site confined in HCS also delivers highly improved ORR kinetics and activity relative to that on planner graphene. Additionally, the best catalyst holds excellent promise in the application of zinc-air batteries. The findings will pave a new way to atomically and electronically tune active sites with high efficiency for other single-atom catalysts.

Halloysite nanotubes modified poly(vinylidenefluoride-co-hexafluoropropylene)-based polymer-in-salt electrolyte to achieve high-performance Li metal batteries.

Solid-state Li metal batteries (SSLMBs) are one of the most promising energy storage devices, as they offer high energy density and improved safety compared to conventional Li-ion batteries. However, the large-scale application of SSLMBs at room temperature is restricted by the main challenges such as low ionic conductivity and poor cyclic performance. Herein, a composed polymer-in-salt electrolyte (CPISE) is fabricated, which is composed of polyvinylidene vinylidene hexafluoropropene (PVDF-HFP) and high-concentration Li bis(trifluoromethanesulphonyl)imide (LiTFSI), reinforced with natural halloysite nanotubes (HNTs). The High concentration of LiTFSI and introduced HNTs synergized with PVDF-HFP to provide more various Li+ transport pathways. Additionally, the backbones of the uniform dispersion of HNTs in the CPISE effectively boosts the physicochemical nature of the CPISE. As a result, the prepared CPISE achieves excellent mechanical strength, high ionic conductivity (1.23*10-3 S cm-1) and high Li+ transference number (0.57) at room temperature. Consequently, in existence of the CPISE, the Li symmetric cell cycles stably beyond 800 h at 0.15 mA cm-2 and the LiFePO4/Li cell displays impressive cyclic performance with capacity retention of 79% after 1000 cycles at 30 °C. Furthermore, the superiority and the functional mechanism of the CPISE are discovered in detail. This work provides a promising strategy for the development of high-performance SSMLBs at room temperature.

High-performance Li/LiNi0.8Co0.1Mn0.1O2 batteries enabled by optimizing carbonate-based electrolyte and electrode interphases via triallylamine additive.

Lithium (Li) metal batteries (LMBs), paired with high-energy-density cathode materials, are promising to meet the ever-increasing demand for electric energy storage. Unfortunately, the inferior electrode-electrolyte interfaces and hydrogen fluoride (HF) corrosion in the state-of-art carbonate-based electrolytes lead to dendritic Li growth and unsatisfactory cyclability of LMBs. Herein, a multifunctional electrolyte additive triallylamine (TAA) is proposed to circumvent those issues. The TAA molecule exhibits strong nucleophilicity and contains three unsaturated carbon-carbon double bonds, the former for HF elimination, the later for in-situ passivation of aggressive electrodes. As evidenced theoretically and experimentally, the preferential oxidation and reduction of carbon-carbon double bonds enable the successful regulation of components and morphologies of electrode interfaces, as well as the binding affinity to HF effectively blocks HF corrosion. In particular, the TAA-derived electrode interfaces are packed with abundant lithium-containing inorganics and oligomers, which diminishes undesired parasitic reactions of electrolyte and detrimental degradation of electrode materials. When using the TAA-containing electrolyte, the cell configuration with Li anode and nickel-rich layered oxide cathode and symmetrical Li cell deliver remarkably enhanced electrochemical performance with regard to the additive-free cell. The TAA additive shows great potential in advancing the development of carbonate-based electrolytes in LMBs.

New Findings: Hindlimb Unloading Causes Nucleocytoplasmic Ca2+ Overload and DNA Damage in Skeletal Muscle.

Disuse atrophy of skeletal muscle is associated with a severe imbalance in cellular Ca2+ homeostasis and marked increase in nuclear apoptosis. Nuclear Ca2+ is involved in the regulation of cellular Ca2+ homeostasis. However, it remains unclear whether nuclear Ca2+ levels change under skeletal muscle disuse conditions, and whether changes in nuclear Ca2+ levels are associated with nuclear apoptosis. In this study, changes in Ca2+ levels, Ca2+ transporters, and regulatory factors in the nucleus of hindlimb unloaded rat soleus muscle were examined to investigate the effects of disuse on nuclear Ca2+ homeostasis and apoptosis. Results showed that, after hindlimb unloading, the nuclear envelope Ca2+ levels ([Ca2+]NE) and nucleocytoplasmic Ca2+ levels ([Ca2+]NC) increased by 78% (p < 0.01) and 106% (p < 0.01), respectively. The levels of Ca2+-ATPase type 2 (Ca2+-ATPase2), Ryanodine receptor 1 (RyR1), Inositol 1,4,5-tetrakisphosphate receptor 1 (IP3R1), Cyclic ADP ribose hydrolase (CD38) and Inositol 1,4,5-tetrakisphosphate (IP3) increased by 470% (p < 0.001), 94% (p < 0.05), 170% (p < 0.001), 640% (p < 0.001) and 12% (p < 0.05), respectively, and the levels of Na+/Ca2+ exchanger 3 (NCX3), Ca2+/calmodulin dependent protein kinase II (CaMK II) and Protein kinase A (PKA) decreased by 54% (p < 0.001), 33% (p < 0.05) and 5% (p > 0.05), respectively. In addition, DNase X is mainly localized in the myonucleus and its activity is elevated after hindlimb unloading. Overall, our results suggest that enhanced Ca2+ uptake from cytoplasm is involved in the increase in [Ca2+]NE after hindlimb unloading. Moreover, the increase in [Ca2+]NC is attributed to increased Ca2+ release into nucleocytoplasm and weakened Ca2+ uptake from nucleocytoplasm. DNase X is activated due to elevated [Ca2+]NC, leading to DNA fragmentation in myonucleus, ultimately initiating myonuclear apoptosis. Nucleocytoplasmic Ca2+ overload may contribute to the increased incidence of myonuclear apoptosis in disused skeletal muscle.

A short-chain carbonyl reductase mutant is an efficient catalyst in the production of (R)-1,3-butanediol.

R-1,3-butanediol (R-1,3-BDO) is an important chiral intermediate of penem and carbapenem synthesis. Among the different synthesis methods to obtain pure enantiomer R-1,3-BDO, oxidation-reduction cascades catalysed by enzymes are promising strategies for its production. Dehydrogenases have been used for the reduction step, but the enantio-selectivity is not high enough for further organic synthesis efforts. Here, a short-chain carbonyl reductase (LnRCR) was evaluated for the reduction step and developed via protein engineering. After docking result analysis with the substrate 4-hydroxy-2-butanone (4H2B), residues were selected for virtual mutagenesis, their substrate-binding energies were compared, and four sites were selected for saturation mutagenesis. High-throughput screening helped identify a Ser154Lys mutant which increased the catalytic efficiency by 115% compared to the parent enzyme. Computer-aided simulations indicated that after single residue replacement, movements in two flexible areas (VTDPAF and SVGFANK) facilitated the volumetric compression of the 4H2B-binding pocket. The number of hydrogen bonds between the stabilized 4H2B-binding pocket of the mutant enzyme and substrate was higher (from four to six) than the wild-type enzyme, while the substrate-binding energy was decreased (from -17.0 kJ/mol to -29.1 kJ/mol). Consequently, the catalytic efficiency increased by approximately 115% and enantio-selectivity increased from 95% to 99%. Our findings indicate that compact and stable substrate-binding pockets are critical for enzyme catalysis. Lastly, the utilization of a microbe expressing the Ser154Lys mutant enzyme was proven to be a robust process to conduct the oxidation-reduction cascade at larger scales.

LiF-Rich Interfaces and HF Elimination Achieved by a Multifunctional Additive Enable High-Performance Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Li-metal batteries (LMBs), especially in combination with high-energy-density Ni-rich materials, exhibit great potential for next-generation rechargeable Li batteries. Nevertheless, poor cathode-/anode-electrolyte interfaces (CEI/SEI) and hydrofluoric acid (HF) attack pose a threat to the electrochemical and safety performances of LMBs due to aggressive chemical and electrochemical reactivities of high-Ni materials, metallic Li, and carbonate-based electrolytes with the LiPF6 salt. Herein, the carbonate electrolyte based on LiPF6 is formulated by a multifunctional electrolyte additive pentafluorophenyl trifluoroacetate (PFTF) to adapt the Li/LiNi0.8Co0.1Mn0.1O2 (NCM811) battery. It is theoretically illustrated and experimentally revealed that HF elimination and the LiF-rich CEI/SEI films are successfully achieved via the chemical and electrochemical reactions of the PFTF additive. Significantly, the LiF-rich SEI film with high electrochemical kinetics facilitates Li homogeneous deposition and prevents dendritic Li from forming and growing. Benefiting from the collaborative protection of PFTF on the interfacial modification and HF capture, the capacity ratio of the Li/NCM811 battery is boosted by 22.4%, and the cycling stability of the symmetrical Li cell is expanded over 500 h. This provided strategy is conducive to the achievement of high-performance LMBs with Ni-rich materials by optimizing the electrolyte formula.

Zeolitic imidazolate framework upgrading polyethylene oxide composite electrolyte for high-energy solid-state lithium batteries.

The energy density of solid-state lithium batteries (SSLBs) has been primarily limited by the low ionic conductivity of solid electrolyte and poor interface compatibility between electrolyte and electrodes. Herein, a multifunctional composite solid polymer electrolyte (CSPE) based on polyethylene oxide (PEO) embedded with zeolitic imidazolate framework-8 deposited on carboxymethyl cellulose (ZIF@CMC) is reported. The ZIF@CMC interpenetrated in PEO matrix creates a continuous Li+ conductive network by combining Zn2+ in ZIF with the unsaturated group in PEO to boost the Li+ transport through the PEO chain segment. On the other hand, Zn2+ can bond with bis(trifluoromethane)sulfonimide (TFSI-) anion, thus promoting the dissolution of lithium salt and releasing more lithium ions. This CSPE demonstrates brilliant electrochemical properties, including a high ionic conductivity of 1.8 × 10-4 S cm-1 at room temperature and a wide electrochemical window of 5 V. The integrated LiFePO4/CSPE/Li batteries using 20 wt.% ZIF-8@CMC show excellent reversible capacity of 145.6 mAh g-1 with a capacity retention of 88.95 % after 200 cycles at a high current density of 0.5C. Our study proposed a novel and effective strategy to construct high-performance solid-state lithium batteries.

Remarkable Plasticity of Bone Iron Homeostasis in Hibernating Daurian Ground Squirrels (Spermophilus dauricus) May Be Involved in Bone Maintenance.

Iron overload is an independent risk factor for disuse osteoporosis. Hibernating animals are natural models of anti-disuse osteoporosis; however, whether iron metabolism is involved in bone adaptation and maintenance during hibernation is unclear. To investigate this question, Daurian ground squirrels (Spermophilus dauricus) (n = 5-6/group) were used to study changes in bone iron metabolism and its possible role in anti-disuse osteoporosis during hibernation. Iron content in the femur and liver first decreased in the torpor group (vs. summer group, -66.8% and -25.8%, respectively), then recovered in the post-hibernation group, suggesting remarkable plasticity of bone iron content. The expression of ferritin in the femur and hepcidin in the liver also initially decreased in the torpor group (vs. summer group, -28.5% and -38.8%, respectively), then increased in the inter-bout arousal (vs. torpor group, 126.2% and 58.4%, respectively) and post-hibernation groups (vs. torpor group, 153.1% and 27.1%, respectively). In conclusion, bone iron metabolism in hibernating Daurian ground squirrels showed remarkable plasticity, which may be a potential mechanism to avoid disuse bone loss during extended periods of inactivity. However, the specific location of iron during low-iron hibernation and the source of iron in post-hibernation recovery need to be further explored.

Multifunctional Electrolyte Additive for Bi-electrode Interphase Regulation and Electrolyte Stabilization in Li/LiNi0.8Co0.1Mn0.1O2 Batteries.

Rechargeable lithium metal batteries (LMBs) with high energy densities can be achieved by coupling a lithium metal anode (LMA) and a LiNi0.8Co0.1Mn0.1O2 (NCM811) cathode. Nevertheless, Li dendrite growth on the LMA surface and structural collapse of the NCM811 material, closely tied with the fragile cathode-/solid-electrolyte interphases (CEI/SEI) and corrosive hydrogen fluoride (HF), seriously deteriorate their performances. Herein, trimethylsilyl trifluoroacetate (TMSTFA) as a multifunctional electrolyte additive is proposed for regulation of the CEI/SEI films and elimination of HF. For one thing, the TMSTFA-derived CEI film rich in C-O species is conductive to Li+ transport and structural stability of NCM811 materials, and the TMSTFA-derived SEI film mainly consisting of inorganics (Li2CO3 and LiF) and organics (C-O and O-C═O species) can significantly promote Li+ homogeneous deposition and impede the Li dendrite growth. For another thing, the undesired reactions of the solvents and LiPF6 salt are effectively retarded by the TMSTFA additive. Consequently, in the presence of TMSTFA, the capacity retention of Li/NCM811 cell is increased by 17% after 200 cycles at 1C, and the lifespan of symmetrical Li/Li cells is prolonged beyond 600 h at 0.5 mA cm-2.

Resistance to disuse-induced iron overload in Daurian ground squirrels (Spermophilus dauricus) during extended hibernation inactivity.

Iron overload occurs in disuse-induced osteoporosis. Hibernators are a natural animal model of resistance to disuse osteoporosis. We hypothesized that hibernators avoid iron overload to resist disuse-induced osteoporosis. Here, the role of iron metabolism in resistance to disuse osteoporosis was investigated by studying differences in iron content and iron metabolism in the femurs and livers of Daurian ground squirrels (Spermophilus dauricus) between the summer active and torpid states. Results showed that the femurs were generally well-maintained during torpor, with no significant differences observed in most bone microstructural parameters, except for a significantly lower (by 40%) trabecular bone connection density. Femur and liver iron concentrations were significantly lower during torpor (by 59% and 49%, respectively). Based on histological staining, livers were iron-negative and femurs showed a reduction in iron-positive area (by 83%) during torpor; The number of osteoblasts and osteoclasts showed no significant differences between the two groups. Most iron metabolism/homeostasis proteins expression levels in the femur and liver showed no significant differences between the two groups, with their stable expression likely preventing iron overload during inactivity. Higher femoral transferrin receptor 1 (TfR1) expression (by 108%) and lower liver ferritin expression (by 45%) were found in torpid squirrels. Lower liver ferritin may be related to the lower iron content, with the elevation in femoral TfR1 potentially related to restoration of bone iron levels. In conclusion, despite long periods of inactivity, iron levels in the femur and liver of squirrels were lower, bone formation and resorption were balanced and no iron overload was observed, as is found under disuse conditions in non-hibernators. Therefore, avoiding iron overload may be a potential mechanism for hibernators to avoid disuse-induced bone loss.